Loctite 638 Very High Strength Retaining Compound - Metal Adhesive Retainer Glue: 10ml Bottle

Product Information

Allow LOCTITE® 638 to develop full strength before subjecting to any service loads. This will usually take about 24 hours. Cilindrische bevestiging, Voor delen met glijdende passing, Voor nauwaansluitende cilindrische onderdelen

Fluorescent, Oil Tolerant, Strength: High Strength, Temperature Resistant, Viscosity: High ViscosityFor shrink fitted assemblies. Apply adhesive onto the pin. Heat collar to create sufficient clearance for free assembly. Hold together or clamp bonds until the adhesive has fixtured.

Fluorescent, Résistance : Résistance élevée, Résistant aux températures, Tolérant aux traces d’huile, Viscosité Viscosité élevée

Product Overview

LOCTITE 638 is a high strength retaining compound. It is designed for the bonding of cylindrical fitting parts. The product is especially suited for use on narrow bond gaps, approaching 0.25 mm. It cures at room temperature when confined between close-fitting metal surfaces. The curing process occurs in the absence of air.

Two of the most popular products in this range are typical examples of the improved formulation. LOCTITE® 638 and 648 are single component acrylic adhesives that are now able to tolerate minor surface contamination from various oils such as those used for metal cutting, lubrication, corrosion resistance and protection. This, together with their ability to withstand higher operating temperatures, considerably extends the application scope of these retaining compounds. Festigkeit: Hohe Festigkeit, Fluoreszierend, Temperaturbeständig, Viskosität: Hohe Viskosität, ÖltolerantApto para Superficies Ligeramente Aceitadas, Fluorescente, Resistencia: Alta Resistencia, Resistente a la Temperatura, Viscosidad: Alta Viscosidad Approbation DVGW (EN 751-1) : NG-5146AR0619, Approbation WRAS (BS 6920) : 0511518, NSF P1 Reg No: 123010 If using on inactive metal or curing speed is too slow, use an activator spray such as LOCTITE SF 7471 or SF 7649. Allow it to dry.